Jumper for my module - AK-105B

General discussion of Advanced Keys and its products.
Post Reply
Ernie81
Posts: 2
Joined: Sun Oct 01, 2017 10:20 am

Jumper for my module - AK-105B

Post by Ernie81 » Thu Oct 05, 2017 10:38 pm

Hi,

Can I use this jumper-969102-0000-DA for my module? Sometimes my push button is not working properly. That's the reason I want to change it. My key model is 105B.

Thanks.

Akeys
Posts: 840
Joined: Mon Mar 21, 2011 7:43 am

Re: Jumper for my module - AK-105B

Post by Akeys » Fri Oct 06, 2017 9:03 am

While yes you can use this jumper but we don't believe it has anything to do with Push-Start not working properly. Can you elaborate "not working properly"? -AK

Ernie81
Posts: 2
Joined: Sun Oct 01, 2017 10:20 am

Re: Jumper for my module - AK-105B

Post by Ernie81 » Fri Oct 06, 2017 10:19 am

Hello Akeys, thanks for your responding.

My key push button is not damaged or something else. Sometimes 2/3 times I have to press the push button and my colleague also use the same keys. Even, we get it at the same time. He advises me to change your jumper module. Is there any way to fix my problem. Only sometimes need 2 or 3 times to press the push button, otherwise, everything is perfect.

Thanks again for helping me. I will wait for your advice.

Akeys
Posts: 840
Joined: Mon Mar 21, 2011 7:43 am

Re: Jumper for my module - AK-105B

Post by Akeys » Wed Oct 11, 2017 2:30 pm

When you say push 2-3 times do you mean it cranks 2-3 time before starts the engine or there is no response at all to button press? What kind button do you have? (button with some depth to it when you press or a surface/shallow membrane type?) -AK

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests